For a sales quote, meeting request, evaluation unit, or other sales question, please fill in the form below:

Terms of Use | Privacy Policy
MH60 Series
Photo of XS Series Power Supply

Versatile High Voltage Power Supply Modules

The MH60 series is a range of versatile high-voltage power supply modules suitable for specification in OEM equipment. Powered from 24 V DC, they supply up to 60 W output and allow full range control and monitoring of output voltage and current. Custom versions can be produced for specific requirements.

Model-Specific Downloads

MH60 series brochure      
Download CAD .sat File
Download CAD .stp File
Typical Applications Features
  • Wide angle, high definition CRTs
  • X-ray equipment
  • Insulation and materials testing
  • Projection
  • 60 W output power
  • High reliability
  • 24 V DC powered
  • Range of outputs available
  • Positive or negative polarity
  • Short circuit and flashover protection
  • Remotely controllable
  • V and I control
  • V and I monitor
  • LED status indication
  • Low ripple
  • RoHS compliant to 2011/65/EU
  • CE marked
Voltage +24 V DC (±10%)
Current (mA) 4 A max
Output and Ordering Info Model  Output Voltage Output Current

MH60/303 30 kV 2 mA
  MH60/403 40 kV 1.5 mA
  MH60/503 50 kV 1.2 mA
Voltage regulation (VDC) Line: less than 0.01% for a 10% change in input voltage
Load: less than 0.01% ±1 V no load to full load
Ripple Less than 0.05% ±10 V peak to peak
Current regulation Line: less than 0.01% for a 10% change in input voltage
Load: less than 0.01% ±1 μA for a 50% voltage change
Programming & Controls All Types
Monitors Voltage: 0 to 10 V ±0.25% ±5 mV for 0 to 50 kV
Current: 0 to 10 V ±0.25% ±5 mV for 0 to 1.2 mA
Note: each monitor has a series output resistor of 1 kΩ
Voltage control 0 to 10 V for 0 to 50 kV accuracy ±0.25% ±10 V
Current control 0 to 10 V for 0 to 1.2 mA  accuracy ±0.25% ±1 μA
Control The power supply is operated via the 9-way D-type connector situated on the rear panel. Full control and monitoring functions are available by this method.

Temperature coefficient 100 ppm/°C over operating temperature range. Applies to voltage control, voltage monitor, and current monitor
Operating temperature 0 to 45°C (32 to 113°F)
Storage temperature -20 to 60°C (-4 to 140°F)
Humidity 85% maximum relative humidity non-condensing
Safety The MH60 series meets the requirements of the Low Voltage Directive (LVD), 2006/95/EC, by complying with BS EN61010 when it is installed as a component part of compliant equipment. It is CE marked accordingly.
RoHS The MH60 series meets the requirements of EU Directive 2002/95/EC on the Restriction of use of certain Hazardous Substances in electrical and electronic equipment (RoHS)
Altitude Sea level to 2000 m (6500 ft)
Protection The units are fully protected against flashover and continuous short circuit (no trip)
EMC The MH60 series is intended for installation as a component of a system. Basic EMC filtering is provided.
Cooling Free convection (no fan)
Installation category 1 (BS EN61010-1)
Pollution degree 2 (BS EN61010-1)

Available Cables:
Part Number    Description                                  
33400206-00    MH60 1M HV Cable
33400206-01     MH60 3M HV Cable
33400206-02    MH60 5M HV Cable

Accuracy of specifications in unlocked documents cannot be guaranteed. Please contact your AE representative to confirm specifications.